Go to Ultimatecarpage.com

Car search: Quick Advanced 
  Ultimatecarpage.com  > Cars by brand  > Italy  > Lamborghini
Countach LP5000 QV
Never miss another Ultimatecarpage.com update, news feature or event report by subscribing to our mailing list to receive all the news in your mailbox ...


Lamborghini Countach LP5000 QV

Lamborghini Countach LP5000 QV Lamborghini Countach LP5000 QV Lamborghini Countach LP5000 QV Lamborghini Countach LP5000 QV Lamborghini Countach LP5000 QV Lamborghini Countach LP5000 QV
Click here to save all images    Image credits: Wouter Melissen 

    

Click here to download printer friendly version It must not have been easy for Marcello Gandini to pen a replacement for the highly acclaimed Miura. Instead of continuing along the lines of the mid-engined sportscar the Bertone designer and Lamborghini started off with a clean sheet. In a bold move both the curvaceous lines and the transverse engine were replaced by a modern wedge and a longitudinal V12 respectively. When Feruccio Lamborghini was shown the first prototype he exclaimed 'Countach', which in the Italian Piemontese dialect is used to describe an attractive woman; the name stuck.

First shown at the 1971 Geneva Motorshow, the Countach prototype featured a 5 litre version of the much acclaimed V12 engine. The drivetrain's longitudinal configuration and displacement explained the type indication 'LP500'. Like it's predecessor the Countach featured an innovative adaptation of the mid-engined layout; this time the gearbox was mounted in front of the engine for a better weight balance. The power was then transferred to the rear wheels by a driveshaft, which ran through its own tunnel in the engine's sump. This would become a trademark mid-engine Lamborghini layout for decades to come.

Although visually similar the production car was almost completely different from the first running prototype. Gone were the monocoque chassis and 5 litre engine, which were replaced by a tubular frame and the Miura derived four litre engine. The prototype's powerplant proved to be too fragile and eventually self destructed in a high speed test session. Some of the original car's clean lines were lost by the addition of a number of necessary cooling ducts and vents. What was retained was the unique scissor-like door mechanism, another soon to be Lamborghini trademark feature.

Two years after the prototype's debut, the production car was launched and officially dubbed Countach LP400. Production of Lamborghini's iconic supercar would last for nearly two decade. Before it was replaced in 1990 five different evolutions of the Countach were constructed. With each evolution power increased and so did the amount of plastic used for additional flares and bodykits. The five litre engine finally became available in 1982 and three years later four valve heads were introduced, bumping the power to 455 bhp for the European version from the original 375 bhp of the LP400.

Right to the end of the Countach production, Lamborghini introduced the biggest changes. Just three litres after officially introducing the 5-litre version of the V12, the engine was completely reworked. Displacement was up again, this time to 5.2 litre. More importantly new heads were fitted, which held four valves per cylinder. This 'Quattro Valvole' V12 produced a hefty 455 bhp, making the Countach QV the most powerful road car available, by quite a margin.

The four-valve Countach made its debut at the 1985 Geneva Motor Show and remained in production until 1988. The subsequent 25th anniversary model used the exact same specification, differing only cosmetically. It was the last of the Countachs and it was replaced in 1990 by the Diablo. At that time the very wild Countach had already achieved a legendary status and forever changed the Lamborghini's reputation. Featured is one of the QV Countachs, shown at the 2008 Concorso Italiano alongside a two-valve LP5000.

Company press release, last updated on 11 / 17 / 2008

Add your comments on the Lamborghini Countach LP5000 QV

     

General specifications
Country of origin Italy
Numbers built 610
Produced from 1985 - 1988
Introduced at 1985 Geneva Motorshow
Body design Marcello Gandini for Bertone

Engine
Configuration 60º V 12
Location Mid, longitudinally mounted
Construction light alloy block and head
Displacement 5.167 liter / 315.3 cu in
Bore / Stroke 85.5 mm (3.4 in) / 75.0 mm (3 in)
Compression 9.9:1
Valvetrain 4 valves / cylinder, DOHC
Fuel feed 6 Weber 44 DCNF Carburetors
Aspiration Naturally Aspirated

Drivetrain
Chassis/body aluminum body on tubular frame
Front suspension double wishbones, coil springs, anti roll bar
Rear suspension upper links, lower reversed wishbones, upper and lower trailing arms, twin coil springs
Steering rack-and-pinion
Brakes vented discs, all-round
Gearbox 5 speed Manual
Drive Rear wheel drive

Dimensions
Weight 1490 kilo / 3284.9 lbs
Length / Width / Height 4140 mm (163 in) / 2000 mm (78.7 in) / 1070 mm (42.1 in)
Wheelbase / Track (fr/r) 2500 mm (98.4 in) / 1536 mm (60.5 in) / 1606 mm (63.2 in)

Performance figures
Power 455 bhp / 339 KW @ 7000 rpm
Torque 501 Nm / 370 ft lbs @ 5200 rpm
BHP/Liter 88 bhp / liter
Power to weight 0.31 bhp / kg
Top Speed 292 km/h / 181 mph
0-60 mph 4.8 s

Resources
Useful links


Ultimatecarpage.com - All Cars - Contact us - Privacy Statement - Top © 1998 - 2009 Ultimatecarpage.com