2018 Alpine A110 Cup - Images, Specifications and Information

Built at Alpine's Dieppe plant, the Alpine A110 Cup's monocoque chassis has been modified to adapt the suspension geometry, reduce ride height (-40mm), provide mounting points for the roll cage and adapt the rigidity to racing requirements, especially as regards the level of grip procured by slick tyres. The design has also been managed as part of a partnership between Signatech and Renault Sport Racing, who provided their expertise and calculation facilities to the project.

In the engine compartment, these modifications resulted in the fitting of specific side members. Connected to the rear part of the roll cage, these magnificently-sculpted aluminium components, machined from a solid block of metal, enable the mounting point of the upper wishbones to be raised. The lower wishbones are attached to the two joint-welded half-subframes supporting the powertrain.

At the front, these modifications have resulted in the fitting of a joint-welded subframe and attachment plates for the upper wishbones.

Supplied by Öhlins, the four spring-shock absorbers are compression- and rebound-adjustable.

Like the production car, the Alpine A110 Cup comes fitted with Michelin tyres. Slick and treaded tyres are designed to provide the best compromise between performance and durability.

Very careful attention has been paid to the active and passive safety features of the Alpine A110 Cup. In order to meet the challenge of integrating a roll cage on an aluminium chassis, the engineers and technicians came up with an ingenious technical solution. During assembly of the monocoque at the Dieppe plant, steel plates are built into the structure, fixed by gluing and then bolting, and protected by an e-coat. These plates are then used as mounting points for the steel tubes that ensure the safety of the driver.

Ready to race, the Alpine A110 Cup comes fitted with a set of premium safety features: specific Sabelt bucket seat with built-in head restraints, six-point HANS-compatible harness, automatic fire extinguisher, dry battery, master switch, etc.

Like the production Alpine A110, the braking system is supplied by Brembo. Machined from a single piece of magnesium, the state-of-the-art six-piston callipers hold imposing ventilated discs, 355mm in diameter at the front and 330mm at the rear. The Alpine A110 Cup is equipped with ABS and traction control systems, which may be adjusted or disabled.

Under the bonnet, the Alpine A110 Cup is powered by the production car's 1.8-litre turbocharged direct injection engine. Fitted with an air filter and an exhaust specially designed for racing, the power of the Cup has been upped to 270hp (+18hp) with its torque maintained at 320Nm.

Electronic management is provided by a state-of-the-art Magneti-Marelli SRG 140 ECU, which also incorporates the engine and chassis data acquisition system.

The engine is coupled with a six-speed sequential gearbox, specifically developed as part of a partnership between Signatech and 3MO. It is equipped with a limited slip, self-locking differential.

The Alpine A110 Cup cabin has been devised to provide drivers with as much pleasure and comfort as possible. Securely settled in the Sabelt bucket seat with a built-in head restraint, the driver is faced with an XAP steering wheel, specifically developed for the Alpine A110 Cup and inspired by the one used on the Alpine A470.

Like every other component on the car, this steering wheel features a perceived quality scarcely found on similar race cars. It features paddle gearshift controls, a digital instrument panel and a variety of useful control switches (steering mapping, traction control and ABS, pit limiter, radio, drink feed, etc.)

The adjustable pedal box and steering column help adapt the driving position to suit all shapes and sizes of driver. The Alpine A110 Cup keeps the original air-conditioning system and allows for a second bucket seat to be fitted without modification for track experiences.

After completing its first track outing, the Alpine A110 Cup will undergo a major testing and development programme. FIA WEC Alpine drivers Nicolas Lapierre and Nelson Panciatici will work on the majority of the sessions, testing the car's reliability and defining the basic set-up, which will then be communicated to all customers.

In order to obtain a product that is as versatile as possible, other drivers - both professionals and amateurs - will be asked to take part in testing on a wide variety of tracks: Jerez, Magny-Cours, Motorland Aragón, Valencia, Portimao, Navarra, etc. Signatech's target is to complete at least 7,500km of testing, the equivalent of three full seasons in the Alpine Europa Cup.

In 2018, the Alpine A110 Cup will be exclusively marketed to customers entering the Alpine Europa Cup. This new competition will meet Alpine's demanding requirements and standards, with a professional, meticulous organisation on the track and a passionate, friendly atmosphere in the paddock.

Organised and promoted by Signatech, this FIA-approved international series will be contested over six meetings and twelve races. The season will kick off on 1-2 June at the Circuit Paul Ricard (France) before then continuing in Germany, the United Kingdom, Belgium and Spain.

A range of products and services are included with driver registration: driver overalls, an allocation of Alpine clothing and tools, access to the Alpine Europa Cup hospitality facilities, communications, Signatech (chassis) and Oreca (engine) technical support, a mobile spare parts store at events, etc.

Each meeting will feature two free practice sessions, two qualifying sessions and two races, with a total track time of three hours. Two drivers may share driving duties for a single A110 Cup.

Three classifications will be drawn up: Overall, Junior (under 25 years old) and 'Gentlemen' drivers (over 45 years old). At the end of the season, the top drivers will share more than €160,000 (approx. £142,000) of prize money and prizes.
<< Prev Page 2 of 2

Article

Image gallery (12)

Specifications

Add your comments on the Alpine A110 Cup

All Cars - Contact us - Privacy Statement - Top