6 Attachment(s)
Chevrolet Standard Six (DC) 1933-1936
he Chevrolet Standard Six (Series DC) was launched in 1933, initially as the Chevrolet Mercury, as a lower priced alternative to the 1932 Chevrolet Series BA Confederate that became the Eagle in 1933 and Master from 1934. It was advertised as the cheapest six-cylinder enclosed car on the market.
The Standard was offered in three body styles all on a 107 inch wheelbase: coach, coupe and coupe with rumble seat. All bodies were by Fisher and featured 'no-draft ventilation'. All models were powered by a 181 cu in (2,970 cc) six-cylinder valve-in-head engine producing 60 bhp (45 kW; 61 PS) at 3,000 rpm and 125 lb·ft (169 N·m) of torque giving the car a top speed of between 65–70 mph. This engine had first appeared in a Chevrolet in 1928. The car had full instrumentation. A clock, heater and a radio were options.
In 1935, a larger 206.8 cu in (3,389 cc) six-cylinder engine was offered in lieu of the 181 cu in (2,970 cc), producing 74 bhp (55 kW; 75 PS) at 3,200 rpm and 150 lb·ft (203 N·m) of torque.
For 1936, the Standard Six received a wide range of improvements and a wider choice of body styles including cabriolet and sports sedan versions. It was built on a new box-girder frame with a wheel base of 109 inches. With an increase of compression ratio from 5.6:1 to 6:1, the standard 206.8 cu in (3,389 cc) engine now produced 79 bhp (59 kW; 80 PS) at 3,200 rpm and 156 lb·ft (212 N·m) of torque which was now shared with the Master Six. The spare wheel moved from its external rear trunk location to a new compartment under the trunk. Brakes were 11-in drums. The steel roof was new.
The Standard Six was discontinued for 1937 when the Master range was joined by the new Master Deluxe.
[SIZE="1"]Source: wikipedia.org[/SIZE]
