6 Attachment(s)
Chery Tiggo (T11) 2006-2013
The Chery Tiggo (Chinese: 奇瑞瑞虎; pinyin: Qíruì Ruìhǔ) is a compact crossover (CUV) produced by the Chinese manufacturer Chery Automobile since 2006. It was facelifted in September 2011, and a new generation was launched in November 2013.
Outside of China, the Tiggo is also being assembled in Uruguay as of late 2007, as a result of a partnership between Chery and Argentine company Socma. The goal is to export the car to Argentina and Brazil – 30% to 50% share of local components are needed to receive zero-tariff status inside the Mercosur. The Tiggo is also imported and assembled in Italy by the DR Motor Company as the dr5.
The 2.0 L version is also being assembled in Egypt as of late 2008 under the Speranza brandname. It is the latest addition to the assembly line of Egyptian assembled Chery cars (Eastar, A5 and A1) by Aboul-Fotouh (a former BMW dealer in Egypt).
In September 2010, Chery released the 2011 Tiggo in China, which is built on the same platform as the outgoing Tiggo 3. To the previous three engine options (1.6/1.8/2.0/L) is added a "1.6s," a 1.6-liter with mechanical supercharger putting out 110 kW (150 PS; 148 hp) at 5500 rpm and 205 N·m (151 lb·ft) between 3,500 and 4,500 rpm.
A 2011 Tiggo was put to an offset crash-test by the ANCAP in October 2011 and scored a poor result of only two stars out of five. The rating comes as the side impact was not conducted, after a request by the manufacturer, and it was awarded the maximum score that it could achieve in the side impact test. ANCAP did not anticipate that the side-impact test would be bad enough to further lower the score.
[SIZE="1"]Source: wikipedia.org[/SIZE]
