View Single Post
  #1  
Old 03-22-2013, 02:28 AM
turbonutter turbonutter is offline
Novice
 
Join Date: Jun 2009
Posts: 18
My 3.2 Turbo Stratos Replica

This is posted on various forums already, but thought I would add it here as well.

Its not an origonal & no attempt is made to make it an exact copy - the emphasis is on performance & a good looking car!

P6201454.jpg P6201467.jpg 1_1.jpg 1_3.jpg Stratos Power Torque3.jpg


Kit -CAE Corse 'I'

Engine
Alfa 3.2 V6 24Valve
Power 475BHP at the wheels
Torque 500lb/ft at the wheels
CP Forged Pistons - 8.5:1 Compression Ratio
THS Forged Connecting Rods
Spesso Head Gaskets
TTV Light Weight Flywheel - 3.2Kg
Tilton Twin Plate Ceremetalic clutch
Engine/Rods/Piston/Crank/Clutch Balanced at Vibration Free
Garret GT3582R Turbo, Tial Stainless Housing 0.82a/r, Ported Shroud
Tial MVR 44mm External Wastegate
Tial BOV 50mm
PWR 6x10 Charge Air Coler With PWR Custom Pre Rad.
Haltech Sport 2000 Engine Management - Mapped by AET Motorsport
Davis Craig Electric Water Pumps 2xEWP 115 in Series
Allisport Custom Radiator
Fuel System
Deka IV Injectors -60lb/hr 630cc/min @ 300KPa
Custom Alloy Fuel Rails
Aeromotive Street Rod Low Pressure Pump
Alloy Racing Fabrications Fuel Swirl Pot
Fuel Lab Prodigy 4101 Injection Pump
Fuel Lab Regulator & Filters

Gearbox
5 Speed Toyota MR2 Turbo, with Quaife ATB
External Oil Cooler
Custom Adaptor plate Alfa/Toyota

Brakes
Hi-Spec 325mm Vented discs
Hi-Spec Billet 4 Calipers (front)
Hi-Spec Billet 4 Hydraulic Handbrake Calipers (rear)
Tilton Adjustable Bias Pedal Box
Wheels - Pro race 1.2 17x7 Front 17x9 Rear
Tyres - Toyo R888 205x40x17 Front 245x40x17 Rear

Bodywork - Group 4 Style
__________________
Cheers Neil

www.turbonutter.net

Last edited by turbonutter; 03-22-2013 at 10:38 AM.
Reply With Quote