First generation (1985–1994)
Codenamed DE-1 during its development (since it was intended to straddle the European D and E segments), the Scorpio was heavily based on the Sierra, sitting on a stretched version of its floorpan, and using a similar styling philosophy set by both the Sierra and the third generation Escort. Under the bonnet were well-proven engines, starting with the venerable Pinto engine unit in 1.8 L and 2.0 L capacities, as well as the V6 Cologne engine in 2.4 L, 2.8 L, and later 2.9 L displacements. By the summer of 1989 the Pinto engines had begun to be gradually replaced, with an 8-valve DOHC engine replacing the 2.0 L model.
The Scorpio was intended to maintain Ford's position in Europe as the principal alternative to a Mercedes or BMW for those looking to own an executive car. It was also launched more than a year ahead of new competitors from Rover and Vauxhall. To this end Ford built on the already extensive specification available on the outgoing MkII Granada (which for the period, was very well equipped, with features such as leather heated electrically adjustable seats, air conditioning, electric sunroof and trip computer either standard or available as options) by adding some additional features unusual on a mass-market car. Improvements available included: heated windscreen, Cruise Control and, later all wheel drive. The most notable advance was the fitment of anti-lock braking system, the first time this feature had been made standard across the whole range on a mass-produced car. The car was widely praised as being very comfortable and spacious, particularly in respect of its rear legroom.
Unlike the Granada, it was initially only available as a hatchback, and not as a saloon or estate. This proved to be a mistake for Ford, which later introduced a saloon version early in 1990, and the estate appeared two years later. There were few engineering changes over the years, notably the introduction of the DOHC engines in 1989, and the Scorpio Cosworth with a 2.9 L 24-valve Cosworth V6 in December 1990.
The Cosworth was both large and fast, which consequently gave it poor fuel consumption.
In the UK and Ireland, following the initial market resistance towards the Sierra - something which had been attributed to its radical styling - Ford elected to keep the Granada name in those markets, making the Scorpio effectively a Mk III Granada. The "Scorpio" name was instead used as a trim designation rather than the model name, being positioned higher than Ford's traditional Ghia top of the range model. These models were marketed as "Granada Scorpio", but were badged simply as "Scorpio", with an elongated "Granada" underneath.
Merkur Scorpio
The Merkur Scorpio was a North American version of the European Scorpio Mk I. The car was offered at select Lincoln–Mercury dealerships from 1988–1989.
It was only offered with the Cologne 2.9L V6 engine with some detail differences from the contemporary Fords. Adapted to meet American emissions requirements, the Merkur version of the Scorpio produced 140 hp (100 kW) when introduced to the North American market in 1988. The vast majority were fitted with the A4LD 4-speed automatic transmission, and the rest received the T-9 5-speed manual transmission. Only automatic versions of the Scorpio were available in Canada. The car was marketed as an upscale, mid-size luxury car, but never achieved the market impact that the Ford Motor Company hoped for. Ford dropped the Merkur nameplate altogether after 1989.
The model was a facelifted Mark I with changed grille, headlights, rear lights, bonnet and dashboard. It went on sale in March 1992, at the same time that an estate model (first shown in London at the October 1991 British Motor Show) was added to the range. The outdated Peugeot XD3 diesel engine was also replaced by a more powerful unit from Italian VM Motori.
This facelift realigned the look of the Granada with the forthcoming Mondeo, and kept styling cues coherent across the model range.
info:wikipedia.org
---------------
Alas I have only one picOriginally Posted by darmal2