How do u fix switches

[targa]

Did you even shut off the electricty when putting the wires back on the switch?

You know he didn't.

[Egg Nog]

I've done hundreds of lights and switches at work. They aren't very complex.

Take off another light and look at how its done. Just do the same on this one. The bare copper (ground) wire should attach to one screw, black (negative) to another, white (positive) to another. The last empty screw doesn't matter - it would only be used by an electrician if they were to put on additional lights straight from there.

By the way, an electrician wouldn't charge you 300+ dollars for this, you completely made that part up. Any electrician of any skill level would be able to do that in under a minute.

[Orefus]

yup yup, i did it!!!! I think the switch is broken tho..... it wont turn off


U think i wired it wrong, or switch broken?

[Mustang]

i thknk your a Richard

[adamfraser]

lol^^

[Egg Nog]

yup yup, i did it!!!! I think the switch is broken tho..... it wont turn off


U think i wired it wrong, or switch broken?

Well if it was broken to begin with you're obviously not going to fix it by taking it apart and putting it back together.


Last Resort Option: Take the white and black wires and press both onto your tongue at the same time.

[johnnynumfiv]

^lmfao

[shr0olvl]

Last Resort Option: Take the white and black wires and press both onto your tongue at the same time.

I hear that works quite well !